PRODUCTOS

Archives

Live Retrofit Supervisor

Live Retrofit Supervisor is a new solution that allows live installation of LV advanced monitoring on any type of three pole fuse switches or circuit breakers with no interruption of the energy supply. The LRS is compatible with any type, country standard and brand of fuse switches, any type and brand of ciurcuit breakers and also compatible with old infrastructure.

This new product has the following features:

  • Live installation
  • Compatible with any LV Panel, brand and type of fuse switches and circuit breakers
  •  Same electronic cards of our other solutions such us Smart Fuse Switches.
  •  Same performance of our other supervisors, including measurements per line and phase
  • Cabling concentrated in each line, no cable on the ground
  • Flexible location of each component on the energy cables
  • Fast installation
  • The solution is compuesta by a feeder meter case, current transformers, voltage taps  and voltage cables.

 

más información

GridGIS Map Creator app

 

Mapping distribution networks with GPS coordinates

For efficient management of distribution networks, it is not only necessary to have an accurate and up-to-date knowledge of the topology of the Low Voltage network, but also to know where these electrical networks run.

With the GridGIS Map Creator app it is possible to carry out, directly in the field, the mapping with GPS coordinates of LV and MV networks, overhead or underground, together with their different assets (SSs, poles, manholes…), as well as piping distribution networks.

Specially designed to work with MRT-700 device, it speeds up field work, simplifies data transfer to the utility’s GIS system and avoids recording errors.

GridGIS Map Creator is designed by Ariadna Grid (Merytronic’s technological partner).

This solution is also valid for piping networks digitalisation.

Main features

  • Register of Secondary Substation (SS) assets: SS, transformer, LV panel, feeder numbers, type of MV and LV cables, MV swichtgear.
  • GPS record of each registered point: CT, CGP, pole, meter, meter centralisation…
  • Map of the route with GPS coordinates.
  • Images of the identified assets
  • Metadata of each point captured, such as depth, signal level (mA)…
  • Tracking of field work
  • Bluetooth connection
  • Export/Import in files compatible with GIS tools: GeoJSON, KMZ and Shapefile
  • Data integration with the utility’s GIS system

 

más información

ETI – Neozed.

D0 fuse-links are used as the most reliable protection of electrical installation, control and signal circuits against overload and short-circuit currents. The whole system D0 contains a complete range of three physical sizes D01, D02 and D03 fuse-links, standard ceramic and new plastic bases, fuse disconnectors and all necessary accessories.
más información

MRT-700 & MRT-500 accessories

 

The MRT-700 and MRT-500 devices,  for underground cable and pipe locator, have the following accessories, adapted to the different needs of the field works.

  • Accessories for energised cables
  • Accessories for de-energised cables
  • Accessories for metallic pipes
  • Accesories for non-metallic pipes

 

Accessories for energised cables

Live cable connector

Accesorios Filtro completo

 

Live cables isolated connection.
For a direct connection in energized cables.
Only works from CI-Tx SW V13 and ahead.

 

 

 

 

Accessories for de-energised cables

Multiple phase connection kit

accesorios cable cortocircuito

 

 

Allows to connect the 3 phases to earth.

 

 

 

 

Ground extension kit

accesorios cable alargador

 

 

For earth connection.
Longitude: 10m.

 

 

 

 

Accessories for metallic pipes

Neodymium magnet

 

accesorio iman MRT-700 tubería metálica

 

 

A quick direct connection to pipeline.

 

 

 

 

 

 

 

Ground extensión kit

accesorios cable alargador

 

 

For earth connection.
Longitude: 10m.

 

 

 

 

Accesories for non-metallic pipes

 

Cable guides

Probes

 

For further information, please contact our sales team.

más información

Merytronic PI-3

Identificación de 3-fases en cable des-energizado

El identificador de fases Merytronic PI-3 es una herramienta digital avanzada, robusta y fácil de usar. Ayuda a los usuarios a identificar fácilmente cualquier cable eléctrico sin tensión y sus fases, entre múltiples conductores, en subestaciones, zanjas, arquetas, paneles, conversiones aéreas/subterráneas, etc.

El transmisor incluye tres pinzas inductivas y tres cocodrilos. Por lo tanto, puede detectar cada una de las fases de una línea sin cambiar la conexión del transmisor. También ayuda a identificar tanto los cables des-energizados antes de ser cortados como los cables abiertos (una vez que ya han sido cortados) para unir correctamente las fases de ambos lados.

Casos de uso:

  • Identificación de fases en cable con ambos extremos en cortocircuito
  • Identificación de fases en cables cortados sin cortocircuito
  • Unión de dos líneas trifásicas fase a fase

Con un solo dispositivo se pueden identificar cualquier tipo de cables tanto en Media como en Baja Tensión y no requiere calibración previa a la identificación.

 

CARACTERÍSTICAS PRINCIPALES

  • Identificación de cualquier tipo de cable sin tensión
  • Cables monofásicos y multifásicos
  • Inyección de señal:
    • Conexión directa
    • Inducida mediante pinza de inducción
  • Longitud máxima del cable > 50 km 
  • Batería recargable en el transmisor. Tiempo de funcionamiento > 12h (inyección continua con pinza inductiva).
  • No requiere calibración antes de su uso (calibrado en fábrica)

 

más información

MRT-500

Underground cable and pipe locator

 

The MRT-500 device is an underground cable and pipe locator, which makes it possible to trace distribution networks quickly, easily and accurately.

  • Energised Cables
  • De-energised Cables
  • Low Voltage, Medium Voltage and High Voltage Lines
  • Metallic and non-metallic pipeline

Specially designed for contractors, maintenance departments, civil works, GIS, etc., to locate and trace the cables of their distribution networks. It is also valid for locating and tracing underground pipe networks.

In addition, thanks to its compatibility with the GridGIS Map Creator digitisation app (developed by Ariadna Grid), it allows the underground network to be digitised accurately.

Main features

  • Receiver with 5 Sensors, strategically distributed
  • Visual and acoustic indication of cable/pipe
  • Measurement of the depth and current amplitude
  • Depth measurement accuracy (<3% up to 2m; <5% up to 10m)
  • Detects 4 active and 2 passive frequencies
  • Up to 10 mts depth (factory configurable for higher values)
  • Operation time >20h
  • Transmitter with 10W of power, user-adjustable
  • Correct performance > 10 km in length
  • Rechargeable internal battery in both devices

 

Others applications

Underground piping networks maintenance (optional)

The MRT-500 device with its different accessories, allows to locate and to trace pipes, in an agile and effective way. It is suitable for both METALLIC and NON-METALLIC pipes, allowing maintenance teams to know exactly where the pipe they need to work on runs, before digging. Avoiding perforate the routes of other services

Metal Piping

  • Direct connection to any accessible point of the pipe
  • No need for guides or probes
  • CPS mode with polarity of the induced signal allows to see the direction of the current and to discriminate returns.

 

Non-metallic piping

  • Specific guide and probe accessory pack for non-metallic piping

 

Electric distribution network digitisation (optional)

 

Once the network assets have been located, the next step in the digitisation of electrical networks is to know where the connection lines run between the different assets.

Merytronic has developed a complete solution, consisting of the MRT-500 device together with the GridGIS Map Creator app. This solution makes it possible to locate and trace the network while recording the data in the digitisation app. Thanks to the app, existing data can be downloaded from the company’s GIS system on a map of the terrain, edited and expanded during field work and uploaded to the system once the work has been completed. This process is carried out in a simple way, thus avoiding transcription errors.

 

Piping networks digitalisation (optional)

 

The MRT-500 device and its digitalisation app GridGIS Map Creator, help to carry out the digitalisation of distribution networks for Oil&Gas companies in an agile and efficient way.  It is suitable for metallic and non-metallic pipes.

Thanks to the app, existing data can be downloaded from the company’s GIS system on a map of the terrain, edited and expanded during field work and uploaded to the system once the work has been completed. This process is carried out in a simple way, thus avoiding transcription errors.

 

There is an advanced version of the locator, the MRT-700, with more features and functionalities.

 

más información