In this version of Advanced Supervision without discharge with vampire voltage tapping, a small perforation is made in the insulation of the cable until it contacts the conductor, without affecting the integrity of the installation. As with the other LRS models, the current is measured by means of open core transformers. It is a universal solution, compatible with any base or switch.

This new product has the following features:

• Live installation
• Compatible with any LV Panel, brand and type of fuse switches and circuit breakers
•  Same electronic cards of our other solutions such us Smart Fuse Switches.
•  Same performance of our other supervisors, including measurements per line and phase
• Cabling concentrated in each line, no cable on the ground
• Flexible location of each component on the energy cables
• Fast installation
• The solution is compuesta by a feeder meter case, current transformers, voltage taps  and voltage cables.

Advanced Line Supervisor (SAL)

Inside this supervisor (SAL) is assembled the TSA feeder meter (Advanced Supervision Card). This three phase meter reads all the
electrical parameters and send them to the LV Remote unit through RS485 serial bus ports.

It includes built-in current transformers and a voltage taps per phase.
Available current transformers with different current ratios, based on fuse switches amperage.

This version of Advanced Supervision without discharge is designed for panel outputs with screw terminals. As with the other LRS models, the current is measured by means of open core transformers. It stands out for its compactness, which facilitates its installation in small or outdoor switchboards.

This new product has the following features:

• Live installation
• Compatible with any LV Panel, brand and type of fuse switches and circuit breakers with screw terminal
•  Same electronic cards of our other solutions such us Smart Fuse Switches.
•  Same performance of our other supervisors, including measurements per line and phase
• Cabling concentrated in each line, no cable on the ground
• Flexible location of each component on the energy cables
• Fast installation
• The solution is compuesta by a feeder meter case, current transformers, voltage taps  and voltage cables.

Supervision of the incoming of the LV switchboard in panel format.

Features:
• Three phase incoming electrical parameters measurement
• Coloured display with buttons to access locally to measurements and firmware upgrade
• Modbus RTU protocol, slave
• 96×96 mm standard format

This version of Advanced Supervision without discharge is designed for V-terminal panel outputs. As with the other LRS models, the current is measured by means of open core transformers. It stands out for its compactness, which facilitates its installation in small or outdoor switchboards.

This new product has the following features:

• Live installation
• Compatible with any LV Panel, brand and type of fuse switches and circuit breakers with V terminal
•  Same electronic cards of our other solutions such us Smart Fuse Switches.
•  Same performance of our other supervisors, including measurements per line and phase
• Cabling concentrated in each line, no cable on the ground
• Flexible location of each component on the energy cables
• Fast installation
• The solution is compuesta by a feeder meter case, current transformers, voltage taps  and voltage cables.

Panel intended for the protection of low-voltage lines in indoor transformer substations that supply the different charging points through converters/rectifiers in fast and ultra-fast charging infrastructures for electric vehicles equipped with medium and high power chargers.

• based on vertical design fuse-switchgear technology
• greater safety and performance
• protection against overloads, short circuits and overvoltages

It has a high capacity and resistance, with a rated current of 2000 A and upwards and up to 8 feeders, which makes it suitable for high energy demand applications. Therefore, it is able to withstand current peaks at the feeders without compromising its lifetime, ensuring reliable and long-lasting performance.

MAXIMUM RELIABILITY

TRIVER vertical fuse switches provide a highly efficient alternative to circuit breakers on distribution panel feeder lines. They act as switches, enabling the line to be controlled while under load. They are available in 3-pole and single-pole phase by phase versions.

MONITORING

The panels can be supplied with our low-voltage distribution network monitoring and remote supervision systems.

EXPANDABLE

Charging stations are still in their early days, so the scenario may change. One great advantage of our panels is that they can be expanded, so additional posts can be installed with no problems.
The roll-out of charging stations has only just begun and demand is expected to increase in the coming years, so our panels are made to be expandable. If more charge points and therefore more feeder lines are needed in the future, an extension switchboard can be added.

MORE COMPACT

The great advantage of fuse holders is that they take up very little space, which makes for a compact, tidy low-voltage panel design.
These distribution panels also use less space that conventional panels with circuit breakers. This means that the transformer substations installed are also more compact.

LOWER COSTS

The smaller size of these installation means that costs are lower. With the extension switchboards that we offer as part of the range, service capacity can be increased without enlarging the installation.
On the other hand, it should be noted that the use of three-pole fuse switches as protection and distribution elements is more economical than the massive use of circuit breakers per feeder.