FEEDER METER | TSA & SBT 00
Global Low Voltage Monitoring System
- Live Retrofit Supervisor
- Smart Fuse Switch (SFS) – Lower Solution (NH 1/2/3)
- LV Edge Node
- Smart Fuse Switch (SFS) – Upper Solution (NH 00/1/2/3)
- 1 pole and 2 pole fuse bases for DC
- 1 Pole fuse bases
- 3 Pole Horizontal fuse bases and fue switch disconnectors
- Accessories
- ADU- Outdoor LV Distribution Boards
- Cabinets for Telemanagement and Telecommunication
- CBT UNESA
- CBTA Insulated box
- CBTA Metallic enclosure
- CBTA PNT Polyester
- CBTA PNT Premium
- CBTA UNESA
- CBTA-M Metallic
- CBTI Outdoor Substation’s LV Switchboard
- CBTI-T-Telemanagement Outdoor Substation’s LV Switchboard
- CBTO Optimized
- CBTR Indoor frame mounted LV Panel
- CGP - House Connection Boxes
- Circuit breaker
- Circuit breaker
- CMAT - Metering panels
- Concrete cabinets
- Concrete enclosure
- CUMA 21 LV Modular Insulated Panel
- Diazed
- Distribution network
- Distribution panels for Utility
- Distribution Transformer monitoring systems
- Earth connection boxes
- Earth Joint Box
- Enclosures
- Energy Monitoring Devices
- ETI | Fuse links and Fuse disconnectors
- ETI Fue links and modular switchgear
- Genset Power Connector - GPC
- Global Low Voltage Monitoring System
- In DC up to 1500 V
- Indoor photovoltaic boxes
- IP20 protected busbar system
- Isolated enclosures
- Load break switch
- Load break switch
- LV distribution panels
- LV Panels for solar plants
- Merytronic
- Neozed
- NH 00 | 160 A | 185 mm
- NH 1/2/3 | 250/400/630 A | 185 mm
- NH Fuse switches
- One pole LV fuse switches – NHC
- One pole open/protected fuse bases
- Other applications
- Other Energy Monitoring Devices
- Other equipments
- Other products
- Other Smart Grids Solutions
- Outdoor photovoltaic boxes
- Photovoltaic AC / DC
- Polyester enclosure
- PV in AC | Switchgear and combiner panels
- Range
- Smart Fuse Switch (SFS)
- Smart grids
- Street lighting cabinets
- Switchboards for Transformer Substations
- Three pole horizontal design fuse switch disconnectors - BTHC
- Three pole horizontal open/protected fuse bases
- Underground Cable and Pipe Locator
- Vertical design fuse rails (BTVA) TRIVER
- Vertical design fuse rails and fuse switches
- Vertical design fuse switches and disconnectors TRIVER+
- Vertical design fuse switches for 800 V AC applications - BTVC
Description
NH 00 | UPPER SOLUTION
The SBT is the feeder meter for NH 00 switches. It´s located on top of the fuse switch, as an extension of the BTVC.
The SBT is connected to the CT’s and voltage taps installed at the rear of the fuse switch.
TSA (ADVANCED SUPERVISION CARD NH 1/2/3)
TSA is a three phase feeder meter compatible with both upper and lower LV monitoring solutions. It calculates RMS values per second of the following variables:
– Voltage per phase
– Current per phase and calculated neutral current
– Imported / exported active, reactive and apparent power per phase and total
– Power factor per phase
– Phase presence
– Frequency
– Cumulative values of imported and exported energy
– Cumulative values of reactive energy in all four quadrants
– Temperature inside the card
– Voltage and current oscilography in case of an alarm
Moreover the card can generate the following alarms per phase:
blown fuse, over/under voltage,current overload, shortcircuit current.
TSA can communicate by DLMS / COSEM protocol on HDLC with the LV Edge Node, or by Modbus RTU. They are connected by a RS485 serial bus in daisychain format (maximum 24 feeder meters per bus).